ActVate The AnswerNg System; Set The Clock - VTech LS6125-2 User Manual

• If you have caller
ID servce, the
clock wll be set
automatcally wth
ncomng calls,
but you wll need
to make sure the
year s correct.
See Set the clock
for nstructons
on how to set the
year, tme and day
manually.
• Press and hold
/SKIP or
/REPEAT whle
settng the mnutes
or year to advance
or decrease by
ncrements of ten.
34
Answering system
Activate the answering system
The answerng system must be turned on to answer
and record messages. Press ANS ON/OFF to turn
the answerng system on or off. If the answerng
system s turned on, t wll announce "Calls will be
answered," and the ANS ON/OFF lght wll be on. If
the answerng system s turned off, t wll announce
"Calls will not be answered," and the ANS ON/OFF
lght wll be off.

Set the clock

Pror to playng a message, the answerng system announces when t was
receved. Before usng the answerng system, set the year, tme and day, so that
messages are dated correctly. If the clock s not set before new messages are
recorded, the system wll announce "Time and day not set," before each message
s played to remnd you to set the clock.
Press CLOCK. The system announces the clock settng (e.g. year, tme and
1.
day), then announces: "To set the clock, press CLOCK."
Press CLOCK. The system announces the current year.
2.
3. Press /SKIP or /REPEAT untl the system announces the correct year, then
press CLOCK. The system announces the current hour.
4. Press /SKIP or /REPEAT untl the system announces the correct hour, then
press CLOCK. The system announces the current mnute.
www.vtechphones.com