Transferring Images By Ztelnet; Figure 4-29 Copying Image Files To Target Board Using Ztelnet - Samsung S3C2410 Installation Manual

S3C2410/ Mobile Solution Group / IM-1.1-04-05

4.13 Transferring Images by ztelnet

Terminal 1: # cd /tmp
# rz
Pushing 'Ctrl + ]', 'ztelnet>' console appears.
ztelnet> sz vivi zImage root_qtopia.cramfs imagewrite
Terminal 2: # cd /tmp

Figure 4-29 Copying Image files to target board using ztelnet

Only /tmp directory can be used for both reading and writing, all directories except /tmp are read-only.
But /tmp directory is ramfs, so if power supply is cut, all images downloaded are deleted.
If you want to store the images, you have to write those to flash memory by using a special utility.
After downloading all images, check the downloaded items by executing 'ls' command in both the
consoles (Terminal 1 and Terminal 2) as shown in above and below figure.
Mobile Solution Group, System LSI.I
Figure 4-30 Image files on Target Board
Property of Samsung Electronics Co., Ltd. 29