Smc Partitioning And Writing Vivi Image; Figure 4-10 Partitioning Smc - Samsung S3C2410 Installation Manual

S3C2410/ Mobile Business Enabling / IM-1.1-04-05

4.5 SMC partitioning and writing vivi image

Now you can write all images including vivi again through vivi prompt. But before writing the images,
you have to partition the SMC to assign the memory for each image. SMC is composed of bon file system
and vivi supports this. So you can make partitions through vivi prompt with the help of following
command.
vivi> bon part 0 192k 2M
The bon command makes 3 partitions of sizes 0~192K, 192K~2M, and 2M~End-part.
0~192k : vivi will be written here.
192k~2M : zImage (kernel) will be written here.
2M~End-part : root.cramfs (root filesystem) will be written here.
Above command does formatting of SMC as well as partitioning it. So if you do next steps like writing
kernel and root filesystem, you have to write vivi again. Write vivi by following command.
vivi> load flash vivi x
16

Figure 4-10 Partitioning SMC

Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.