National Instruments sbRIO-9638 Quick Reference Manual
National Instruments sbRIO-9638 Quick Reference Manual

National Instruments sbRIO-9638 Quick Reference Manual

Hide thumbs Also See for sbRIO-9638:

Advertisement

Quick Links

Connect to Power

1. Ensure that your power supply is powered off.
2. Insert the power connector plug into the power connector receptacle of
the sbRIO-9638 until the connector latches into place.
3. Turn on the power supply.

Connect to the Host Computer via USB

1. Power on the host computer.
2. Connect the USB Type-C 2.0 device port of the sbRIO-9638 to the
host computer using a Type-C to Type-A USB cable.
OR

Connect to the Host Computer via Ethernet

1. Power on the host computer.
2. Connect the sbRIO-9638 to the host computer using a standard Category 5
(CAT-5) or better shielded, twisted-pair Ethernet cable.
For a complete list of resources go to the following URL:
Information is subject to change without notice. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on NI trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/
technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at
ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer
to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade compliance policy and how to obtain relevant HTS codes,
ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN
AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject
to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.
© 2019 National Instruments
All rights reserved.
ni.com/r/sbrio
377899A-03.
Aug19
Quick Reference Guide
RMC Breakout
Board
sbRIO-9638
Standoffs
and Screws
Screwdriver
DSUB Cable
Documentation
Driver Media
Kit Contents
sbRIO-9638
Power Supply
IDC to
USB Cable

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the sbRIO-9638 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for National Instruments sbRIO-9638

  • Page 1 Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/ technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at ni.com/patents.
  • Page 2 DIO1 TXD– Shield DGND DIO27 DGND DIO2 DGND DIO3 sbRIO-9638 Parts Locator Diagram sbRIO-9638 LEDs 11 12 1. Connector1 (DIO Port) 8. Power terminal 1. Power LED 2. Connector0 (MIO Port) 9. CAN port 2. Status LED 3. RS-485 port (ASRL3) 10.

Table of Contents