Telephone operation
Mute
The mute function enables you to hear the other party but
the other party cannot hear you.
During a call, press MUTE/
1.
handset screen shows MUTED for a few seconds and
appears until mute function is turned off.
MUTE
Press MUTE/
2.
conversation. The handset screen temporarily shows
MICROPHONE ON.
Ringer mute
When the telephone is ringing, press OFF/
MUTE/
to temporarily silence the ringer without
REMOVE
disconnecting the call. The next call rings normally.
Call waiting
If you subscribe to call waiting service from your telephone company, you
hear an alert tone if there is an incoming call while you are on another call.
Press
/FLASH
at any time to switch back and forth between calls.
/FLASH
Find handset
Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base. All idle handsets ring and
1.
the screens show ** PAGING **.
2.
To end paging, press
FIND HANDSET on the telephone base.
REMOVE
again to resume the
REMOVE
to put your current call on hold and take the new call. Press
/FLASH
on the handset. The
or
CLEAR
, any dialing keys (0-9, #, *), or press
,
13
PHONE
0:00:00
MUTED
MUTE
RINGER MUTE