Make Cid Entries Ready To Dial; Dial A Call Log Entry; Save An Entry To The Directory - VTech DS4121-4 User Manual

Advanced operation

Make CID entries ready to dial

Although the call log entries received are 10 digits (the area code plus the
7-digit number), in some areas, you may need to dial only the seven digits,
or a 1 plus the seven digits, or a 1 plus the area code plus the seven digits.
You can change the number of digits that you dial from the call log.
While reviewing the call log, press # repeatedly to display these dialing
options for local and long distance numbers before dialing or saving the
telephone number. See an example at right.

Dial a call log entry

1. When in the call log, use the up or down NavKey
the desired entry.
/FLASH or
2. Press

Save an entry to the directory

1. When in the call log, press the up or down NavKey
the desired entry.
2. Press the center NavKey
3. If the entry has a name and a number, the screen displays SAVED.
If the entry was previously saved, the screen will display ALREADY SAVED.
4.
5. If the entry only has a name or a number, EDIT NAME or EDIT NUMBER
will be displayed. Use the dial pad to enter the name or number and then
press the center NavKey
tone.
If there is no caller ID information, the screen will display UNABLE
6.
TO SAVE.
/SPEAKER to dial the entry.
to save the entry.
to save the entry. You'll hear a confirmation
www.vtechphones.com
800-595-9511
1-800-595-9511
or to scroll to
or to scroll to
UNABLE TO SAVE
• Saving or deleting
a number on
one handset will
automatically update
all other handsets.
• Only one handset
1-595-9511
can review the
595-9511
directory or call
log at a time. If one
handset is viewing
the call log and
another handset
attempts to review
it, the screen
will display NOT
AVAILABLE AT
THIS TIME.
SAVED
23