Avaya D260 Using Manual page 64

Menu operation
In the status bar, the bluetooth icon
paired with any bluetooth devices. This bluetooth icon
a bluetooth device.
Search for devices
To search for bluetooth devices the bluetooth function needs to be enabled before the handset can
find any devices. For the bluetooth device to be found by the handset search it needs to be in
pairing mode. Until the handset has found any bluetooth devices in pairing mode a searching
screen as displayed below is seen.
As seen above, the bluetooth devices in pairing mode will be listed as they are detected by the
handset. At first the ID of the bluetooth device will only be shown, but waiting a little while the
name of the device will appear on the handset screen. In this way it is easy to locate if it is the
wanted device that the handset is about to connect to.
Often, a PIN code is requested when a device is selected. By entering the requested PIN code of
the bluetooth device a connection should be successfully established as shown in the following
window.
August 2020
is shown if bluetooth is enabled, but the handset is not
Using Avaya Wireless Handset D260
Comments on this document? infodev@avaya.com
is displayed if the handset is paired with
64