Devolo Magic2 LAN DINrail Manual page 35

35 Configuration
Powersave
devolo Magic 2 LAN DINrail
settings.
Standby
If Standby
devolo Magic 2 LAN DINrail automatically swit-
ches to Standby mode if no ethernet connection
has been enabled, i.e. if no network device (e.g.
computer) is switched on and connected to the
network interface and if Wi-Fi is disabled.
In this mode, the devolo Magic 2 LAN DINrail is not
accessible over the Powerline network. As soon as
the network device (e.g. computer) connected to
the network interface is switched on again, your
adapter can also be accessed over the electrical
wiring again.
Standby
devolo Magic 2 LAN DINrail factory default condi-
tion.
Firmware update
The currently installed firmware of the
devolo Magic adapter is displayed on the over-
view page (see Overview).
devolo Magic 2 LAN DINrail
mode is disabled
factory
mode is enabled,
mode is enabled
in the The firmware of the devolo Magic 2 LAN DINrail
default includes the software for operating the device. If
necessary, devolo offers new versions on the
Internet as a file download. The firmware update
can be initiated automatically or manually.
the
Regularly check for firmware updates
The devolo Magic 2 LAN DINrail can look for up-to-
date firmware automatically. To do this, enable the
in the
option Regularly check for firmware updates.
The devolo Magic 2 LAN DINrail lets you know
when a new firmware version becomes available
and asks if firmware should be updated.
Automatically install firmware updates
With the option Automatically install firmware
updates enabled, the devolo Magic 2 LAN DINrail
automatically installs the firmware it has found.