Devolo Magic2 LAN DINrail Manual page 14

PLC (Fig. 2)
PLC-LED Flashing
haviour
1 Red LED Lights up for
up to 2 sec.
2 Red LED Flashes at in-
tervals of 0.5
sec. (on/off)
be- Meaning
Start-up process
Status 1:
The reset of the devolo Magic adapter was
successful. The reset button has been pres-
sed and held for 10 seconds.
Status 2:
The devolo Magic adapter (once again) has
the factory default settings. Since the last re-
set, no pairing with another devolo Magic
adapter has taken place.
Connect the adapter
devolo Magic adapter to create a full-
fledged PLC network as described in Chap-
ter 4 Initial use.
Introduction 14
LED status display
(web interface*)
Cannot be disabled
Cannot be disabled
with another
devolo Magic 2 LAN DINrail