ABB M25102xC Series Manual page 67

ABB-Welcome
1. Hang the device in the installation box.
2. Fasten the safety loop.
3. Connect the wires into the enclosed clamp and plug the clamp onto the contact pins;
Fold the device and shut it until it audibly snaps in.
4. Screw on the front of the device.
Three types of installation
Option 1: Flush-mounted only with a flush-mounted box
Fig. 31 Flush-mounted only with a flush-mounted box
Option 2: Flush-mounted with a rain hood
|
Mounting / Installation
— 67 —