ABB M25102xC Series Manual page 36

ABB-Welcome
#* system password #
5# => 2 #
*Reset the system password of keypad module:
It is possible to reset the system password to factory-setting if you have forgotten it.
The restoration of default factory settings does not delete the rest of the
information programmed on the system, such as user names and other settings.
1. Disconnect the power supply.
2. Reconnect the power
Hold the "program button" for 5s within 30s.
3.
A "di" will be sounded and the system password will be reset to the default
4.
(345678).
|
=>
Operation
— 36 —