Yardworks 060-3801-2 Owner's Manual page 16

Assembly
TINES INSTALLED CORRECTLY (Fig. 7)
NOTE: When the tines are installed correctly, the flute on the tines should line-up, and the
angled edge of the tine blades should point towards the ground (Fig. 7).
NOTE: The tiller will not operate properly if the tines are not installed correctly. If there is a
problem with the cultivating operation of the tiller, check the tines for proper positioning.
NOTE: The directional arrow that is displayed on each tine should point toward the front.
FLUTE
INSTALLING TWO TINES FOR TILLING A NARROW AREA (Fig. 8)
Place tine (A) onto the shaft, and place tine (D) onto the other side shaft. Insert the hitch pin
into the holes in order to secure the tines to the tine shaft. (Fig. 8)
FRONT
A
FLUTE
FRONT
A
GEAR BOX
C
B
16
FLUTE
HITCH PIN
D
Fig. 7
D
HITCH PIN
Fig. 8