Yardworks 060-3801-2 Owner's Manual page 15

Assembly
INSTALLING THE TINES (Fig. 5.1-5.6)
The tiller comes with four tines — For correct operation of the unit, the tines must be installed
in the correct order. The tiller may be used with four tines or two tines.
• Disconnect from power source.
• Lean the unit back on its wheels so that it is resting securely with the handlebar on the ground.
Fig. 5.5
FRONT
B
GEAR BOX
4. Place the felt onto the shaft (Fig. 5.5).
C
FELT
TINE SHAFT
FLUTE
15
Fig. 5.6
FRONT
A
B
C
5. Place the tine (D) onto the shaft. The flute of
tine (D) should face in toward tine (C). Insert
the hitch pin into the holes that are located on
the shaft in order to secure the tines (Fig. 5.6).
D
HITCH PIN