Table of Contents
Advertisement
Installation
Connect power to base unit/chargers
1 . Plug the power adapter into an electrical outlet not controlled by a wall switch, and the
• Connect the power
and telephone
2 . Choose the location for your charger, and plug its power supply into an electrical
line cords to the
underside of the
base as illustrated .
• Plug the AC
adaptor into an
electrical outlet . If
the battery has not
been charged,
place the handset
in the base or
charger, and allow
it to charge for at
least 16 hours .
• Caution: Use only
the VTech power
supply provided
with your phone .
Connect to phone line
Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone
base . Then plug the other end of the cord into the wall telephone outlet .
6
connector into the bottom of the base unit .
outlet .
To power outlet
www vtechphones com
To telephone outlet
Advertisement
Table of Contents
