Call Screening; Set Remote Access; Setting The Remote Access - VTech i6775 User Manual

Answering system operation

Call screening

If you wish to listen to caller's leaving their message before choosing to answer a call, follow these
steps:
1 . Set the playback VOL on the base unit to a level greater than 1 by
pressing or .
2 . If you decide to answer a call while the caller is leaving a message,
simply press TALK/FLASH on the handset . The answering system will
stop and you can begin speaking to the caller .
Access code
To retrieve new messages from any touch tone phone from a remote
location, an access code is required . The remote access code can be
any two digit number between 10 and 99 . The remote access code has
been set to 19 at the factory but it can be changed at any time for your
convenience .

Setting the remote access

1 . Press SETUP twice, the system announces "Remote access code. To change the setting, press
CHANGE."
2 . Press CHANGE, the system announces the current setting (the default remote access code is
19 . )
3 . Press and release CHANGE to advance the remote access code number by one . Press and hold
CHANGE to advance the remote access code by 10 .
4 . When the desired number is announced . Press SETUP to save and advance to the next menu
option . Or press PLAY/STOP
/ to save and exit .
www vtechphones com 33