Tuning The Tv Into The Vcr - Sharp VC-FH30SM Operation Manual

INSTALLING YOUR VCR

TUNING THE TV INTO THE VCR

IMPORTANT NOTE: By pressing the STANDBY button, the VCR will toggle
between STANDBY and POWERSAVE modes. The VCR display will not be
illuminated in POWERSAVE mode.
1.
Ensure your VCR is still in the STANDBY
mode (not POWERSAVE).
2.
Switch on the TV. Select an unused
channel on your TV for your VCR (there
may be a dedicated video channel refer
to your TV operation manual).
3.
Press and hold the
seconds. The VCR will search and display
the ideal RF channel.
CAUTION:
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer
to RF through ON/OFF.
4.
Tune the selected channel on your TV
(refer to your TV manual) until the menu
screen appears.
5.
SET
Press to store the RF channel and to
place the VCR back into STANDBY.
NOTE:
• If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 3 using [
RF THROUGH ON/OFF:
• If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your
VCR can be turned OFF and ON by pressing the
STANDBY at point 2. This will help minimise interference.
MENU button for 3
/ ] keys.
The TV is tuned to the VCR.
Example:
MENU SCREEN
S HOWV I EW
T I ME R
MOD E
GRUND E I N S T E L L UNG
: WÄH L E N
S E T : E I NGAB E ME NU : E ND E
CLEAR button then
GB-5
SET to return to