Auto Installation - Sharp VC-FH30SM Operation Manual

INSTALLING YOUR VCR

AUTO INSTALLATION

STOP
Press to switch on your VCR.
This model will automatically tune in the TV channels in your area, sort them into a standard
order and set the clock.
The screen opposite should be showing on your TV.
Follow the instructions from the screens.
The VCR will attempt to copy the TV preset list
(NexTView, Smart Link, Easy Link and Megalogic
compatible TV's only). During the copying process
the display will show the TV presets that are being
copied. If the VCR is unable to copy the TV preset
list the terrestrial channels will be automatically
installed. (Auto sort will take a few minutes to
complete)
On completion, the MOVE MENU will appear
showing the present channel order. Press
exit.
If the clock is NOT automatically set, the clock
screen will appear., refer to
SETTING THE CLOCK
been set correctly, press DISPLAY until the time
appears on the display.
If you wish to customise the channel order refer to
VCR RESET
1.
Press STOP to switch on the VCR.
2.
MENU
Press and hold
for 10 seconds.
3.
The AUTO INSTALLATION screen should now be showing on your TV.
4.
Follow the on-screen display to proceed with auto installation.
CUSTOMISED INSTALLATION
Refer to the
• Your VCR could not tune automatically - due to for example poor reception.
• You wish to re-arrange the channel order.
• You wish to change the time on the clock or if the VCR could not set the time.
All the programmes should now be correctly tuned in and the clock set.
MENU
MANUALLY
. To check the clock has
CHANNEL
and
GB-6
AU T O I N S T A L L A T I ON
P R E S S S E T K E Y T O S T AR T
AU T OMA T I S CH E E I N S T E L L UNG
Z UM B EG I NN , D I E S E T - T A S T E
DRÜCK E N .
S E T : E I NGAB E ME NU : E ND E
• If the screen above does not
appear, follow the procedure
VCR RESET
to
MANUALLY SORTING CHANNELS
buttons together on the front of the VCR
chapter if
below.
.