Tuning The Tv Into The Vcr - Sharp VC-MH71SM Operation Manual

VC-MH71SM ENGLISH.book Page 5 Tuesday, April 20, 1999 10:52 AM
INSTALLING YOUR VCR

TUNING THE TV INTO THE VCR

IMPORTANT NOTE: By pressing the STANDBY button, the VCR will toggle
between STANDBY and LOW POWER modes. The VCR display will not be
illuminated in low power mode.
1.
Ensure your VCR is still in the STANDBY
mode (not low power).
2.
Switch on the TV. Select an unused
channel on your TV for your VCR (there
may be a dedicated video channel refer
to your TV operation manual).
3.
Press and hold the
seconds. The VCR will search and display
the ideal RF channel.
4.
Tune the selected channel on your TV
(refer to your TV manual) until the menu
screen appears.
5.
Press SET to store the RF channel and to
place the VCR back into STANDBY.
NOTE:
• If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 3 using [
MENU
button for 3
/ ] keys.
The TV is tuned to the VCR.
GB-5
Example:
VCR
MENU SCREEN
T I ME R
MODE
GRUND E I N ST E L L UNG
: WÄHL E N
S E T : E I NGABE ME NU : E NDE