Tuning The Tv Into The Vcr - Sharp VC-MH711GM Operation Manual

INSTALLING YOUR VCR

TUNING THE TV INTO THE VCR

IMPORTANT NOTE: By pressing the STANDBY button, the VCR will toggle between STANDBY and
LOW POWER modes. The VCR display will not be illuminated in low power mode.
1.
Ensure your VCR is still in the STANDBY mode
(not low power).
2.
Switch on the TV. Select an unused
channel on your TV for your VCR (there
may be a dedicated video channel,
refer to your TV operation manual).
3.
Press and hold the
seconds. The VCR will search and display
the ideal RF channel.
4.
Tune the selected channel on your TV
(refer to your TV manual) until the menu
screen appears.
5.
Press SET to store the RF channel setting
and to place the VCR back into
STANDBY.
NOTE:
• If you have a preferred channel, the RF channel can be set manually (21-69) after
K
Step 3 using [
MENU button for 3
L
/ ] keys.
The TV is tuned to the VCR.
Example:
MENU SCREEN
T I ME R
MOD E
S E T U P
: CHANGE
S E T : E N T E R
5
ME NU : E X I T