Tuning The Tv Into The Vcr - Sharp VC-GH611GM Operation Manual

TINS-A083UMZZEnglish.book Page 5 Monday, November 11, 2002 9:39 AM
Downloaded from: http://www.usersmanualguide.com/
INSTALLING YOUR VCR

TUNING THE TV INTO THE VCR

This model automatically tunes the TV channels for your area, then using Teletext information
sorts the TV channels into a standard order and sets the clock. If the VCR has not previously
been tuned-in, instructions will be given on screen to guide you through this procedure.
1.
Ensure your VCR is still in the STANDBY mode.
2.
Switch on the TV. Select an unused
channel on your TV for your VCR (there
may be a dedicated video channel refer
to your TV operation manual).
3.
Press STOP . The VCR will search and
display the ideal RF channel.
•
If you are connected via a scart lead, go to step 5.
CAUTION:
• If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR.
Refer to RF through ON/OFF below.
4.
Tune the selected channel on your TV
(refer to your TV manual) until the
menu screen appears.
5.
Press SET to store the RF channel
setting and continue with the
installation.
NOTE:
• If you have a preferred channel, the RF channel can be set manually (21-69) after
K L
Step 3 using [ / ] keys.
RF THROUGH ON/OFF:
• If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your
VCR can be turned OFF and ON at Point 3 by pressing the
continuing with the installation. This will help minimise interference.
✔
Example:
AUT O I NS T AL L AT I ON
P R E S S S E T K E Y T O S T AR T .
S E T : E N T E R
If the above screen does not appear, follow the
procedure RESET THE VCR
The TV is tuned to the VCR.
GB-5
Blue
Background
with White
Text
ME NU : E X I T
CLEAR button then