Pausing And Slow Motion - Sharp VC-FH30SM Operation Manual

BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
SHARP SUPER PICTURE
normally set to ON. To turn
VCR front panel.
• For double speed playback (without sound), press
• To revert to normal playback, press
• To stop the video tape, press
• To eject the tape press
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
• Press CHANNEL
Tracking)
• Press CHANNEL

PAUSING AND SLOW MOTION

1.
Press PLAY/X2
2.
To pause the video tape, press
• To minimise jitter whilst in pause mode press
• Press PLAY/X2
3.
To playback in slow motion (without sound) press
motion speed can be adjusted using the
Picture disturbance can be improved by using the
motion playback.
• Press PLAY/X2
NOTES:
• When using SLOW MOTION function some mechanical noise may be heard.
• There will be picture interference and possibly a change to black and white picture
using Pause and Slow functions.
• PAUSE mode will disengage after about 5 minutes.
should enhance the picture quality during playback. It is
SHARP SUPER PICTURE
PLAY/X2
STOP
(
EJECT on the VCR.
or to position picture interference off the TV screen. (Manual
and buttons together to start Auto Tracking.
( ) to start the video tape playing.
PAUSE/STILL (
( ) to resume playback.
( )to resume playback.
on or off press
PLAY/X2
( ) again.
).
)
.
CHANNEL
SLOW
or buttons next to the slow button.
CHANNEL
GB-8
SUPER P. on the
( ) again.
flashes on the on-screen
or .
on the remote control. Slow
or during slow