Wireless Personal
Alert Button
SOS100
Instruction Manual
Thank you for purchasing Wireless Personal Alert Button. With cutting-
edge design and elegant appearance, it is easy to carry and use. This
button can only be used together with our alarm systems. In case of
emergency, the Panel will alarm and you will be alerted by SMS or calls.
Connect with Control Panel
This button should be used together with our Control Panels. It can only
work after being connected with the Control Panel.
The Control Panel should be under the connecting state (please refer to
the instructions of each Panel)
Press the SOS button, the Panel beeps once. The connection is
successful.
Note:
The Control Panel will beep twice if the Personal Alert has been connected before.
SOS Button
Usage
Press the SOS button when there is an emergency. The alert SMS for
emergency will be sent or you will get a phone call from the Control
Panel regardless of the Panel state. Then you are able to take actions
immediately.
Note:
The alarm numbers should be pre-stored in the Control Panel to get alert SMS or phone
call from Panel when there is an alarm.
For how to store phone numbers, please refer to the manual of each Control Panel.
Specifications
Power Supply
DC 3V (one CR2032 button cell battery)
<7mA
Alarm Current
<80m (in open area)
Transmitting Distance
Radio Frequency
433.92MHz
Housing Material
ABS plastic
Operating Condition
Temperature 0° C~+55°C
Relative Humidity <80% (non-condensing)
Main Body Dimensions (L x W x H)
Key Ring
52 x 54.5 x 10mm
Need help?
Do you have a question about the SOS100 and is the answer not in the manual?
Questions and answers