1. Manuals
  2. Brands
  3. Rockwell Automation Manuals
  4. Industrial PC
  5. 6181P
  6. User manual

Rockwell Automation Allen-Bradley 6181P User Manual

Integrated display industrial computers
Hide thumbs Also See for Allen-Bradley 6181P:
Table of Contents

Advertisement

Quick Links

Download this manual
Integrated Display Industrial Computers
Catalog Numbers 6181P, 6181F
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Rockwell Automation Allen-Bradley 6181P

Summary of Contents for Rockwell Automation Allen-Bradley 6181P

  • Page 1 Integrated Display Industrial Computers Catalog Numbers 6181P, 6181F User Manual...
  • Page 2 In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.
  • Page 3 Summary of Changes The information below summarizes the changes to this manual since the last revision. Revision bars, as shown in the margin, identify updated information. This document includes the following changes. Topic Page Updated Operating System info for Windows Embedded Standard 2009 9, 73 Updated the Multilingual User-interface CD Pack information Updated Product Options table to include new catalog numbers...
  • Page 4 Summary of Changes Publication 6181P-UM002B-EN-P - January 2010...

  • Page 5: Table Of Contents

    Table of Contents Preface ............7 Intended Audience .
  • Page 6 Table of Contents Hard Disk Drive ......... . 45 Add-in Cards .

  • Page 7: Intended Audience

    6181P Integrated Display Computers Installation Provides procedures on how to install Instructions, publication 6181P-IN010 the computer and make connections. Cloning Utility for Rockwell Automation Industrial Provides information on how to Computers Technical Data, publication create and restore a back-up image of 6000-TD002 your computer’s hard disk drive.
  • Page 8 Preface Publication 6181P-UM002B-EN-P - January 2010...

  • Page 9: Chapter 1 Chapter Objectives

    Chapter System Features Chapter Objectives This chapter provides an overview of the computer. • Operating systems • Multilingual User-interface CD Pack • Product options • Parts list • Hardware features Computer Overview The integrated display computers combine a TFT flat-panel display with industrial computing power for performing visual interface, maintenance, and basic information applications.

  • Page 10: Multilingual User Interface Cd Pack

    Chapter 1 System Features Computer System Cloning CD to restore the operating system from the recovery partition, create a new recovery image, and create bootable external-recovery media. Refer to the Cloning Utility technical data, publication 6000-TD002, for instructions. Computers with Windows Embedded Standard 2009 include a utility for configuring the Enhanced Write Filter (EWF) and Hibernate Once Restore Many (HORM) features.

  • Page 11: Product Options

    System Features Chapter 1 Product Options The table summarizes the product options available for the integrated display computers. For a summary of features available for the performance and standard models, refer to Appendix A, Specifications. Cat. No. Model Series Display Size Touch Screen Package 6181P-2PXP...

  • Page 12: Parts List

    • System Support CD with Diagnostic Utility (green CD) • Microsoft Multilingual User Interface (MUI) CD Pack (gray) • DVD burning software (performance models only) Accessories and You can view a current list of accessories at this Rockwell Automation website http://ab.com/industrialcomputers. Replacement Parts Publication 6181P-UM002B-EN-P - January 2010...

  • Page 13: Hardware Features

    System Features Chapter 1 Hardware Features The illustrations show the hardware features for the performance and and standard models of the computers. Performance Computers Performance Computers, Front and Side Views 1500P Model Shown Item Component LCD panel Front access cover Optical disc drive CompactFlash Type II card slot Hard-disk drive bay...
  • Page 14 Chapter 1 System Features Performance Computers, Bottom View 1500P Model Shown Item Component PS/2 mouse port PS/2 keyboard port Parallel port Ethernet ports (RJ45), 2 DVI-I port PCI riser slot cover Power switch (2) (3) Power input, AC or DC Functional ground screw USB ports, 4 CompactFlash Type II card slot...
  • Page 15 System Features Chapter 1 Standard Computers Standard Computers, Front and Side Views 1500P Model Shown Item Component LCD panel CompactFlash Type II card slot Rear cover Power adapter Mounting slots With or without optional touch screen. Publication 6181P-UM002B-EN-P - January 2010...
  • Page 16 Chapter 1 System Features Standard Computers, Bottom View 1500P Model Shown Item Component Power switch Serial COM port Ethernet ports (RJ 45), 2 Power input, DC (use supplied adapter only) Functional ground screw Power input, AC USB ports, 4 Microphone-in jack Audio line-out jack Audio line-in jack Publication 6181P-UM002B-EN-P - January 2010...
  • Page 17 System Features Chapter 1 Non-display Computers Non-display Computers, Front and Side Views Item Component Mounting hole Hard disk drive Optical disc drive CompactFlash Type II card slot Rear cover Publication 6181P-UM002B-EN-P - January 2010...
  • Page 18 Chapter 1 System Features Non-display Computers, Bottom View Item Component PS/2 mouse port PS/2 keyboard port Parallel port Ethernet ports (RJ45), 2 DVI-I port PCI riser slot cover, 2 Power switch (1) (2) Power input, AC or DC Functional ground screw USB ports, 4 CompactFlash Type II card slot Serial COM ports, 2...

  • Page 19: Chapter 2 Chapter Objectives

    This product meets the European Union Directive requirements when installed within the European Union or EEA regions and have the CE mark. A Compliance copy of the Declaration of Conformity is available at the Rockwell Automation website http://www.ab.com. The product is intended to operate in an industrial or control...

  • Page 20: Environment And Enclosure Information

    Chapter 2 Installation Environment and Enclosure Review the information on enclosures and environments before installing the product. Information This equipment is intended for use in a Pollution Degree 2 ATTENTION industrial environment, in overvoltage Category II applications (as defined in IEC publication 60664-1), at altitudes up to 2000 m (6561 ft) without derating.

  • Page 21: Installation Considerations

    Installation Chapter 2 Installation Considerations Follow these guidelines to make sure your product provides safe and reliable service. • The installation site must have sufficient power. To maintain an electrically safe installation, the AC powered ATTENTION products must be plugged into a grounded outlet. •...

  • Page 22: Mounting Clearances

    Chapter 2 Installation Mounting Clearances When selecting an installation site for the computers, be sure to allow adequate clearance on the sides and rear of the computer for proper ventilation, cable connection, and hardware access. Sufficient airflow throughout the system unit is required to maintain proper cooling.

  • Page 23: Product Dimensions

    Installation Chapter 2 Product Dimensions Product dimensions for each version of the computer are given in mm (in.). 1200P Non-display Computer 353 (13.90) 1.6 (0.06) 108 (4.25) 335 (13.20) (3.28) Publication 6181P-UM002B-EN-P - January 2010...
  • Page 24 Chapter 2 Installation 1200P Integrated Display Computer – Performance 320 (12.60) 124 (4.90) 115 (4.5) 115 (4.5) 100 (3.94) 349 (13.74) 14.5 (0.57) 1200P Integrated Display Computer – Standard 320 (12.60) 115 (4.5) 115 (4.5) 85.35 (3.36) 14.5 (0.57) 349 (13.74) Publication 6181P-UM002B-EN-P - January 2010...
  • Page 25 Installation Chapter 2 1500P Integrated Display Computer – Performance 320 (12.60) 31.82 (1.25) 31.82 (1.25) 100 (3.94) 145 (5.7) 145 (5.7) 28 (1.10) 410 (16.14) 14.5 (0.57) 1500P Integrated Display Computer – Standard 32.55 (1.28) 32.55 (1.28) 320 (12.60) 144 (5.67) 144 (5.67) 86 (3.38) 14.5 (0.57)
  • Page 26 Chapter 2 Installation 1700P Integrated Display Computer – Performance 320 (12.56) 51 (2.0) 51 (2.0) 100 (3.94) 145 (5.7) 145 (5.7) 28 (1.10) 452 (17.80) 14.5 (0.57) 1700P Integrated Display Computer – Standard 51 (2.0) 320 (12.56) 51 (2.0) 150 (5.90) 150 (5.90) 86 (3.38) 452 (17.80)

  • Page 27: Mount The Display Computer

    Installation Chapter 2 Mount the Display All display computers install in a panel with mounting clips. Computer Tools Required These tools are required for product installation: • Panel cutout tools • #2 Phillips screwdriver • Antistatic wrist strap (recommended) Mounting Guidelines Observe these guidelines when installing the unit in a panel: •...
  • Page 28 Chapter 2 Installation Mount the Display Computer in a Panel Mounting clips secure the display computer to the panel. The number of clips varies by model. Follow these steps to mount the computer in a panel. 1. Remove power from the panel. 2.
  • Page 29 Installation Chapter 2 5. Gradually tighten the clips, one at a time, around the bezel using the specified sequence starting with the center clips and continuing to the corner clips. The bezel gasket forms a compression type seal. Sealing compounds are not required. 6.

  • Page 30: Mount The Non-Display Computer

    Chapter 2 Installation Mount the Non-display The non-display computers can be installed to a wall. Computer Tools Required These tools are required for product installation: • #2 Phillips screwdriver • Antistatic wrist strap (recommended) Mount the Non-display Computer to a Wall M5 panhead screws secure the non-display computers to a wall.

  • Page 31: Connecting Peripherals

    Installation Chapter 2 Connecting Peripherals Connect the required peripherals, such as keyboard and mouse, to the corresponding I/O ports. Refer to the appropriate illustrations under Hardware Features page 13 for connector locations. You can use the USB ports on the I/O port panel to connect various USB devices, such as an external HDD or floppy disk drive, to the computer.

  • Page 32: Applying Power

    Chapter 2 Installation Applying Power The computer connects to either a 100…240V AC or 18…32V DC power source, depending on the model. • Connect the AC power cord or the DC ground connection to a power ATTENTION source with an earth ground to prevent electrical shock. Failure to follow this warning could result in electrical shock.
  • Page 33 Installation Chapter 2 Connect AC Power to Standard Computers Follow these steps to connect AC power to the standard computers. 1. Connect the power cord to the AC power input (1), and secure it in place with the retention clip (2). 2.
  • Page 34 Chapter 2 Installation Connect DC Power to Performance and Non-display Computers Performance and non-display computers with catalog numbers ending in DC have a DC input terminal block for connecting to a 18…32V DC power source. The DC power option supports operation from either a safety extra-low voltage (SELV) or protective extra-low voltage (PELV) power source.

  • Page 35: Functional Ground Screw

    Installation Chapter 2 Functional Ground Screw The pre-installed functional ground screw is not required for safety or regulatory compliance. However, if a supplemental ground is desired, use the functional ground screw in the I/O port panel of the computer. If using the functional ground screw, connect the product to earth ground by using a 1.5 mm (16 AWG) or larger external wire.

  • Page 36: Connecting To A Network

    Proper cable routing and power conditioning is required for reliable Ethernet communication in industrial environments. Rockwell Automation recommends that you route all Ethernet cabling through dedicated metal conduits. Installing ferrite bead filters at the cable ends may also improve reliability.

  • Page 37: Chapter Objectives

    Chapter Operation Chapter Objectives This chapter covers these topics: • Operating guidelines • Operator access • Starting the system • Resetting the system Operating Guidelines Follow these operating guidelines for your computer: • To avoid dust and other airborne contamination infiltrating the product when mounted in a suitable enclosure, the door to the enclosure must be closed at all times during operation.

  • Page 38: Starting The System

    Chapter 3 Operation Starting the System Before starting the computer, make sure peripheral devices are connected to their corresponding I/O ports. The illustrations show computers with an AC power input. Performance and Non-display Computers Standard Computers When power is applied to the computer, it will start without having to press the power switch.

  • Page 39: Chapter Objectives

    Accessories and You can view a current list of accessories at the Rockwell Automation website http://ab.com/industrialcomputers.com. Replacement Parts Review the specifications of a new component before installing it to make sure it is compatible with the computer.

  • Page 40: Voltage Precaution

    Chapter 4 Component Replacement Voltage Precaution The computers contain line voltages. Disconnect all power to the computer before you install or remove system components. Disconnect power from the computer before removing SHOCK HAZARD components. Failure to disconnect power could result in severe electrical shock or damage to the computer.
  • Page 41 Component Replacement Chapter 4 Remove and Reinstall the Rear Cover The pocedures for removing and reinstalling the rear cover are different for the computer models. Performance and Non-display Computers The performance computer is shown. Follow these steps to remove the rear cover. 1.
  • Page 42 Chapter 4 Component Replacement Standard Computers Follow these steps to remove the rear cover. 1. Disconnect power from the computer. 2. Loosen the one screw that secures the rear cover (1). 3. Slide the cover downward to release the inner tabs from the chassis (2). 4.

  • Page 43: Compactflash Card

    Component Replacement Chapter 4 CompactFlash Card The computers have a CompactFlash (CF) Type II card slot for loading CF cards. • The standard computers have one CF slot on the right side of the computer. • Performance and non-display computers have two CF slots: one on the right side of the computer, and another on the I/O port panel below the serial ports.
  • Page 44 Chapter 4 Component Replacement 4. Insert the CF card into the slot until it is firmly seated (1). Do not force the card into the slot. Forcing the card into the slot ATTENTION may damage the connector pins. 5. Close the CF card slot cover (2). 6.

  • Page 45: Hard Disk Drive

    Component Replacement Chapter 4 Hard Disk Drive You can replace the default hard-disk drive (HDD) with a higher capacity model. To locate the catalog number of a compliant 2.5-in. HDD, go to the website http://ab.com/industrialcomputers. Hard-Disk Drive Configuration Precautions Follow these precautions when working with the hard disk drive. Back up or clone your system before replacing the hard disk IMPORTANT drive.
  • Page 46 Chapter 4 Component Replacement Replace the Hard Drive in Performance/Non-display Computers The hard disk drive (HDD) on performance and non-display computers is on the right side of the computer. The performance 1500P computer is shown. Follow these steps to replace the hard disk drive in performance and non-display computers.
  • Page 47 Component Replacement Chapter 4 8. Hold the new HDD by its edge and remove it from its protective packaging. 9. Align the new HDD on the carrier (1). 10. Connect the power and data cables to the HDD (2). 11. Secure the new HDD to the carrier with the four screws and torque the screws to 0.452 N•m (4 lb•in) (3).
  • Page 48 Chapter 4 Component Replacement Replace the Hard Drive in Standard Computers The hard disk drive (HDD) on the standard computers is under the power adapter assembly. Follow these steps to replace the hard disk drive in standard computers. 1. Disconnect power from the computer. 2.
  • Page 49 Component Replacement Chapter 4 9. Hold the new HDD by its edge and remove it from its protective packaging. 10. Slide the new HDD into its metal frame and make sure it’s properly engaged to the HDD power and data cables (1). 11.

  • Page 50: Add-In Cards

    Chapter 4 Component Replacement Add-in Cards The performance and non-display computers support half-length, full-height add-in cards. Half length PCI cards are 106.68 (height) x 175.26 mm (length). Even though the standard computer has onboard expansion IMPORTANT slots, its chassis design prevents it from supporting add-in card installation.
  • Page 51 Component Replacement Chapter 4 Install an Add-in Card Follows these steps to install an add-in card. The performance computer is shown. 1. Disconnect power from the computer. 2. Remove the rear cover. 3. Remove the one screw that secures the slot cover (1). 4.
  • Page 52 Chapter 4 Component Replacement 6. Connect the add-in card to a compatible riser-board slot, making sure that the card is properly seated in the slot (1). 7. Secure the add-in card with the one screw (2). 8. Connect the necessary cables to the add-in card. Refer to the documentation that came with the card.
  • Page 53 Component Replacement Chapter 4 PCI Riser Board Options You can use the PCI Expansion Slot Kit, catalog number 6189V-EXTPCIS, to change the default one-slot PCI riser board to a: • two-slot PCI riser board. • one slot PCI Express riser board. •...
  • Page 54 Chapter 4 Component Replacement 5. Remove the two screws that secure the default riser board (1). 6. Remove the riser board from its bracket (2). 7. Place the default riser board with its screw on a static-dissipating work surface or inside an antistatic bag. 8.
  • Page 55 Component Replacement Chapter 4 10. Insert the riser board connector in the onboard expansion slot making sure the board is properly seated in the slot (1). 11. Tighten the three screws to secure the PCI riser board assembly to the chassis (2).

  • Page 56: Memory Module

    Chapter 4 Component Replacement Memory Module The computers have two dual-channel DDR-II DIMM slots that support up to 4 GB maximum system memory. Note that Microsoft Windows limits the maximum usable capacity to approximately 3 GB. Memory Configuration Guidelines Follow these guidelines when adding memory to the computers: •...
  • Page 57 Component Replacement Chapter 4 Upgrade the System Memory Follow these steps to install a memory module. 1. Disconnect power from the computer. 2. Remove the rear cover. 3. If you want to install an additional module instead of replacing the default one, proceed to step 4.
  • Page 58 Chapter 4 Component Replacement 8. Hold the memory module by its edge and remove it from its protective packaging. 9. Orient the module so that the notch on its bottom edge aligns with the keyed surface of the DIMM slot (1). The DIMM slots are designed for proper installation.

  • Page 59: Rtc Battery

    Component Replacement Chapter 4 14. Reinstall the rear cover. 15. Apply power to the computer. RTC Battery The computers use nonvolatile memory that requires an RTC (real-time clock) battery to retain system information when power is removed. The RTC battery is beside the DIMM1 slot.
  • Page 60 Chapter 4 Component Replacement Replace the RTC Battery Failure to follow proper safety precautions could result in SHOCK HAZARD severe electrical shock or damage to the computer. To avoid voiding your product warranty, use only the Rockwell ATTENTION Automation Allen-Bradley approved battery. Use of another battery may present a risk of fire or explosion.
  • Page 61 Component Replacement Chapter 4 10. Select Exit Saving Changes to reset the system configuration to factory defaults and close BIOS Setup. Loss of BIOS settings occurs when the battery is removed. BIOS IMPORTANT settings must be reconfigured whenever the battery is replaced.
  • Page 62 Chapter 4 Component Replacement Publication 6181P-UM002B-EN-P - January 2010...

  • Page 63: Chapter 5 Chapter Objectives

    Chapter System Troubleshooting Chapter Objectives This chapter provides information on the these topics: • Hardware diagnostics • Troubleshooting procedure • Diagnostic utility • Clearing CMOS procedure • Troubleshooting checklists Hardware Diagnostics The built-in hardware monitor of the computer tracks the operating threshold levels of the voltage and temperature sensors.

  • Page 64: Troubleshooting Procedure

    Chapter 5 System Troubleshooting Troubleshooting Procedure Follow this procedure to identify and isolate a problem with the computer’s operation. 1. Shut down the computer by using the appropriate method for the installed operating system. 2. Disconnect power from the computer. 3.

  • Page 65: Clear Cmos

    System Troubleshooting Chapter 5 Clear CMOS If the system configuration has been corrupted, or if an incorrect set-up setting has caused error messages to be unreadable, you need to clear the system configuration values stored in the CMOS. Use the clear CMOS jumper (CN6) to reset the CMOS data. Follow these steps to clear the CMOS.

  • Page 66: Troubleshooting Checklists

    Chapter 5 System Troubleshooting Troubleshooting Checklists Use the following checklists to test or verify items. Problems During Startup • Are all connections secure? • Are the device drivers installed? • Are the jumpers on any add-in boards correctly positioned? • Is the hard disk drive formatted and recognized correctly in the BIOS Setup? •...
  • Page 67 System Troubleshooting Chapter 5 Problems Running the New Software • Does the software have a hardware requirement that is not present? • Are you using an authorized copy of the software? Some copies of software will not work without proper activation. •...
  • Page 68 Chapter 5 System Troubleshooting Publication 6181P-UM002B-EN-P - January 2010...

  • Page 69: Chapter 6 Chapter Objectives

    Chapter Maintenance Chapter Objectives This chapter provides information on how to: • clean the computer. • dispose of the backlight assembly. • ship or transport the computer. Cleaning the Computer It is important to maintain your computer by cleaning the display, heat sink and vent holes, and removing grease or paint.

  • Page 70: Backlight Assembly Disposal

    Chapter 6 Maintenance Clean the Heat Sink and Vent Holes Follow these steps to clean the chassis. 1. Disconnect power from the computer at the power source. 2. Disconnect all peripheral devices from the computer. 3. Vacuum dust and debris from the heat sink and vent holes. Remove Paint and Grease from Bezel Follow these steps to remove paint and grease from the bezel of computers properly mounted in NEMA Type 4/4X or IEC IP66 enclosures.

  • Page 71: Transporting The Product

    Doing so may cause damage to the product. You must uninstall the product and place in its original packing material before shipping. Rockwell Automation is not responsible for damage incurred to a product that is shipped or transported while installed in a machine, panel, or rack.
  • Page 72 Chapter 6 Maintenance Publication 6181P-UM002B-EN-P - January 2010...
  • Page 73 Appendix Specifications Integrated Display Computers Attribute Value Processor Performance Intel Core Duo U2500, 1.2 GHz/2M L2 cache/533 MHz 9 W Standard Intel Celeron M423, 1.06 GHz/1M L2 cache/533 MHz 5.5 W System chipset Intel 945GME, ICH7-M System memory slots Dual channel DDR II, 2 DIMM slots, 4 GB max System memory, installed Performance 1 GB...
  • Page 74 Appendix A Specifications Display Specifications Attribute Value Display Type Active Matrix Color TFT Touch screen (optional) Resistive antiglare Display size (diagonal) 1200P 308 mm (12.1 in.) 1500P 381 mm (15 in.) 1700P 432 mm (17 in.) Display area (WxH) 1200P 246 x 185 mm (9.7 x 7.3 in.) 1500P 305 x 229 mm (12 x 9 in.)
  • Page 75 Specifications Appendix A Mechanical Specifications Dimensions, overall (HxWxD), approx. Non-display 251 x 353 x 108 mm (9.88 x 13.90 x 4.25 in.) 1200P Performance 279 x 349 x 124 mm (10.98 x 13.74 x 4.90 in.) Standard 279 x 349 x 99 mm (10.98 x 13.74 x 3.91 in.) 1500 Performance 309 x 410 x 100 mm (12.16 x 16.14 x 3.94 in.)
  • Page 76 Appendix A Specifications Environmental Specifications Attribute Value Temperature, operating 0…50 °C (32…122 °F) Performance 1700P 0…55 °C (32…131°F) Performance 1200P, 1500P, and non-display Standard 0…50 °C (32…122 °F) Temperature, nonoperating -20…60 °C (-4…140 °F) Relative humidity 10…90% without condensation Altitude, operating 2,000 m (6,561 ft) Altitude, nonoperating 12,000 m (40,000 ft)

  • Page 77: Touch Screen Controller

    Appendix Using a Touch Screen Touch Screen Controller Computers with a touch screen are shipped with the touch screen controller installed and connected. The touch screen controller connects internally to a USB port. The touch screen is factory configured with the proper USB and touch screen driver settings, so no user configuration is required.

  • Page 78: Calibrate The Touch Screen

    Appendix B Using a Touch Screen Calibrate the Touch Screen The touch screen supplied with the computer is factory installed and calibrated. Follow these steps to recalibrate the touch screen. 1. Run the touch screen configuration utility through the Programs menu of the operating system.

  • Page 79: Upgrade The Bios From A Floppy Disk Drive

    Upgrading to a New BIOS Sometimes a new BIOS is released to enhance the performance of your computer or to correct a defect. You can download BIOS updates from the Rockwell Automation website http://ab.com/industrialcomputers to update your computer. Both floppy and CD upgrades are available.

  • Page 80: Upgrade The Bios From A Cd Drive

    Appendix C Upgrading to a New BIOS Upgrade the BIOS from a Follow these steps to update the BIOS in your computer from a CD drive. CD Drive 1. Attach an external monitor (non-display computers), keyboard, and CD drive to your computer. 2.

  • Page 81: Overview

    Appendix Solid State Drive Overview A reliable means of data storage is a concern in industrial applications with harsh requirements. Standard rotating media with its spinning platters and head arms (with temperature limitations) present obstacles to the reliable storage of data. Solid state drives (SSD) are a direct replacement for rotating hard drives on the IDE bus.

  • Page 82: Installation

    Appendix D Solid State Drive Installation Use caution when installing or handling a solid state drive. Even though the solid state drive is typically designed with a case around the PCB assembly, you must handle the drive with care to prevent possible electrostatic discharge (ESD) damage.

  • Page 83: Life Expectancy

    Solid State Drive Appendix D Life Expectancy The limitation of the solid state drive is the finite amount of writes to a specific memory location. The life expectancy of a solid state drive varies depending • how often an application writes data to the drive. •...

  • Page 84: Maintenance

    Appendix D Solid State Drive An application updates a 100K data file every second on the 4 GB drive that is approximately half full with the OS image and application software. Use this formula to calculate the drive’s expected life span: (Flash blocks x Write cycle limit x Drive free space) / [(1 block/sec) x (31,536,000sec/yr)] (32,768 x 2,000,000 x .5) / [ (1 block/sec) x (31,536,000 sec/yr)] = 1039 years B.
  • Page 85 Index display, cleaning 69 AC power connect 32 add-in cards electrostatic discharge install 51 environmental requirements PCI Expansion Slot Kit considerations 21 options 53 ESD, see electrostatic discharge riser board options 53 Ethernet connection 36 slot description 50 European Union compliance 19 troubleshooting 67 audio jacks in non-display computers 18...
  • Page 86 Index cleaning display 69 1700P display, performance 26 product transport 71 1700P display, standard 26 memory DIMM slots 56 installation precautions 56 rear cover upgrade 57 install, performance/non-display 41 mounting install, standard 42 panel mounting 27 remove, performance/non-display 41 mounting clearances 22 remove, standard 42 mounting dimensions 23 replacement parts 39...
  • Page 87 Index hardware monitor 63 integrated display problem 67 ventilation 21 problem after startup 66 voltage precaution 40 problem analysis 64 problem during boot-up 66 problem during startup 66 software problem 67 Windows Operating Systems 9 Publication 6181P-UM002B-EN-P - January 2010...
  • Page 88 Index Notes: Publication 6181P-UM002B-EN-P - January 2010...
  • Page 89 Index Notes: Publication 6181P-UM002B-EN-P - January 2010...
  • Page 90 Index Publication 6181P-UM002B-EN-P - January 2010...
  • Page 92 Rockwell Automation representative. New Product Satisfaction Return Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.

This manual is also suitable for:

Allen-bradley 6181f

Table of Contents