Search Source List In Dialing; Blacklist - Yealink W56P User Manual

Placing a Call from Local Directory
To place a call from the local directory via the handset:
1.
Press to enter the main menu.
2.
Select Directory.
3.
Press or to highlight the desired entry.
4. Do one of the following:
- Press , if only one number is stored for the contact in the local directory,
the phone will dial out the number directly.
- Press , if both the office number and the mobile number are stored for
the contact in the local directory, the screen will display two numbers.
Press or to highlight the desired number.
Press to dial out.

Search Source List in Dialing

You can search for a contact from the desired lists when the phone is on the dialing screen. The
lists can be Local Directory, History, Remote Phone Book and LDAP.

Blacklist

You can store up to 30 contacts in one handset's blacklist. You can add, edit or delete contacts
in the blacklist. You can also dial a call from the blacklist, but an incoming call from a contact in
the blacklist will be rejected automatically.
To add an entry to the blacklist manually via the handset:
1. Press to enter the main menu.
2.
Press Settings->Telephony->Caller Blacklist.
3. Press the Options soft key, and then select New Entry.
If there is no entry, press the OK soft key directly.
4. Enter the desired number in the Phone Number field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also add an entry to the blacklist from the call history. For more information, refer to
Call History Management on page 4248.
To delete an entry from the blacklist via the handset:
1.
Press to enter the main menu.
2.
Select Settings->Telephony->Caller Blacklist.
3.
Press or to highlight the desired entry.
4. Press the Options soft key, and then select Delete.
Phone Settings
41