Toro 04294 Installation Instructions Manual page 8

Figure 14
1. 2-socket connector (wire
harness—LED light and
wireless hour meter
harness kit)
2. 2-pin connector (wire
harness—LED light kit)
5. Secure the wire harness for the LED light kit to the
harness of the machine with a cable tie as shown in
Figure 15.
Figure 15
1. Wire harness (machine)
2. Cable tie
3. Console
3. Wire harness (LED light
kit)
5
Connecting the Spark-Plug
Wire
No Parts Required
Procedure
Connect the spark-plug wire to the terminal of the spark plug;
refer to Figure 1 of 1 Preparing the Machine (page
8
2).