Maintenance
Cleaning
Clean the sensors periodically with a damp cloth. If a
sensor is damaged or excessively dirty, replace it.
Important: Do not spray water at or on the sensors.
Water sprayed under even household pressure
can damage the sensor. Always cover the sensors
completely before washing the sprayer.
Note: When the booms are in the cradle for extended
periods of time, the seal around each sensor (which is
oriented upward) may get exposed to ultraviolet light and
gradually deteriorate. Keep the bottom of the sensors
from being exposed to direct sunlight whenever possible.
Storage
Whenever you are not using the sensors for an extended
period of time, put the safety caps on the sensors to
protect them from the outdoor elements.
15