Charging Curves - NDS SMARTCHARGER SCS2 User Manual

NOTE
If the Lithium battery (LiFePO
function UVP (under voltage protection) disconnects the battery
to prevent damages, the SMARTCHARGER will be not able to
charge. In fact this protection interrupts the connection between
battery and chargers/appliances and the SMARTCHARGER will
detect no battery.
To solve this problem press the "MODE" button for 5 seconds and
release until the "LITHIUM LiFePO
after that the charge will start normally.

7. Charging curves

The new "OPTICHARGE" firmware engineered by NDS
software team optimize the battery charge according
to the battery technology using optimal charging
parameters and constantly checking current and
voltage levels to let you have always ready to go and
healthy batteries.
With OPTICHARGE you will have the best charging
experience ever created by NDS, the easiest way: just
p l u g t h e d e v i c e i n t o t h e p o w e r s o c k e t ,
SMARTCHARGER
• SMARTCHARGER
14,4V, suitable for auto and motor vehicle.
• SMARTCHARGER
program: auto, moto, AGM batteries, lithium
batteries. suitable for auto and motor vehicle.
14,4V / 1A
• SMARTCHARGER
program: auto, moto, AGM, lithium. suitable for auto
and motor vehicle, RV, marine, truck.
14,4V / 2A
) is deeply discharged and the
4
" led light will be turned on,
4
will do the rest!
SCS2 - automatic charger up to
SCS4 - 4 different charging
14,4V / 4A
SCS8 - 4 different charging
14,4V / 8A
9
AGM
14,7V / 4A
AGM
14,7V / 8A
LITHIUM
LiFePO
4
14,4V / 4A
LITHIUM
LiFePO
4
14,4V / 8A