NDS SMARTCHARGER SCS2 User Manual page 9

ICON
MODE
AGM
LITHIUM
LiFePO
4
See the charging curve full description (Page 9).
Follow this steps to start the charge:
1. Connect the
then plug the AC power socket. The power status led
will turn on.
NOTE
If the ac power socket is connected before connecting the
clamps to the battery, the error led will be turned on
Connect the clamps to the battery then push the mode selection
button
MODE
2. If everything is ok
charging directly.
Selection Button - Curve selection and reset during charge
Error Led - short circuit, reverse polarity, bad battery
Full charge / maintenance mode on
AGM batteries / Cold temperature charging curve
Lithium (LiFePO
SMARTCHARGER
to restart the process.
SMARTCHARGER
STATE OF CHARGE
Power status Led
Rescue mode
Battery is Charging
Bike battery charging curve
Car battery charging curve
) battery charging curve
4
to the battery (P.5),
7
SCS2 will start