NDS SMARTCHARGER SCS2 User Manual page 10

For SMARTCHARGER
"MODE" selection button to switch between auto,
motorcycle, AGM, Lithium, charging curve.
When a charging curve is selected the process will
start.
3. SMARTCHARGER
start. If the battery is ok the charge will start
normally (step 5), if not the device will try to recover
the battery (step 4).
4. If there's something wrong with the battery
SMARTCHARGER
rescue led will light up.
Rescue can take 30 to 120 minutes.
Charge will turn to normal charge (step 5) when the
battery is recovered. If battery can't be recovered the
error led will be light up
5. If everything is ok the charge will start and the
charging led will light up.
6. The full charge / maintenance led will light up when
the battery is fully charged and now is in trickle
charge: If the voltage drops down
sends current to the battery.
be connected for months without any trouble.
SCS4 and SCS8 use the
LITHIUM
LiFePO
AGM
will check battery status before to
will try to recover it and the
SMARTCHARGER
8
4
SMARTCHARGER
can