Installing And Removing The Weights; Checking The Level Of The Engine Oil - Toro Sand Pro 2040Z Operator's Manual

1
Figure 12
1. Wear safety glasses.
Installing and Removing the
Weights
The machine complies with the ANSI B71.4-2012 standards
at the time of production. However, when the following
attachments are installed on the machine, additional weight
is required to comply to the standards. Use the chart below
to determine the additional weight required. The machine
comes with 4 weights. Each attachment comes with the
necessary additional weights, if required.
Attachment
Flex tooth rake
Flex tooth rake with finish brush
Nail drag
Nail drag with finish drag mat
1. Remove the 2 bolts and 2 nuts securing the existing
weights on the front of the machine
Note: If the machine is equipped with the light kit,
remove the nut and the bolt securing the front light to
the machine. Retain all of the parts; refer to the Light
Kit Installation Instructions.
2
G009027
2. Wear hearing protection.
Number of weights required
4
6
6
8
(Figure 13).
2. Add or remove weights as necessary.
3. Secure the weights with the 2 bolts and the 2 nuts.
•
For most of the attachments, use the existing bolts.
•
The finish drag mat includes 2 longer bolts
to accommodate the additional weights that it
requires.
Note: If the machine is equipped with the light kit,
install the front light by inserting the bolt through the
weights and securing it with the nut; refer to the Light
Kit Installation Instructions.
Checking the Level of the
Engine Oil
Service Interval: Before each use or daily—Check the level
of the engine oil.
Toro Premium Engine Oil is available from your Authorized
Toro Distributor.
Crankcase Capacity: 1.8 L (1.7 US qt) with filter change
Use 4-cycle engine oil that meets or exceeds the following
requirements:
•
API service category: SJ, SL, SM, or higher
•
Viscosity: SAE 30; refer to the following chart for other
viscosities (Figure
Important: Using multi-viscosity oils, such as
10W-30, increases oil consumption. Check the oil
level more frequently when using them.
21
G023729
Figure 13
14):