Using Lighting Node Pro; Frequently Asked Questions - Corsair CARBIDE Series Manual

ENGLISH

9. Using Lighting Node PRO

• Turn your system off prior to installing your Lighting Node PRO.
• Plug the mini USB cable into the back of the Lighting Node PRO then plug the
9-pin end into an available internal USB 2.0 header in your system.
• Connection Notes
> The Fan LED wiring must be connected to the fan hub in the order you want
the lighting effects to be displayed.
> Fans must start at "1" and continue in series. 1 > 2 > 3 > 4 > 5 > 6
> Any fan not connected in series will break communication and the RGB LED
lighting function will not work.
• Mount the fan(s) to the location of your choice in the chassis.
• Find a location for the fan hub that allows connection for all of the fans RGB
LED cables installed in your system to reach.
> The fan controller will also need to be plugged into the fan hub for control of
the RGB LED lighting.
• Mount the fan hub with the provided mounting strips.
9

Frequently asked questions

1. Does the polarity matter with the I/O panel's power and reset header?
No, only the LED headers.
2. Who should I contact if I received my case damaged or one of the fans
is no longer working?
Please go to support.corsair.com and request an RMA so that we can replace
the damaged part(s).
3. Where can I mount a fan?
Fan mount locations
Front 3 x 120mm / 2 x 140mm
Top 2 x 120mm / 2 x 140mm
Rear
To learn more about this case visit the product page at corsair.com.
1 x 120mm
10
ENGLISH