Boiling eggs
Remove all accessories from the mini pan (10).
Use the measuring cup (11) to determine the amount of water
required and pour the water into the mini pan (10).
Place the egg holder insert (9) onto the mini pan (10).
Prick the eggs with the egg-pricker underneath the measuring
cup (11) and place them in the egg holder insert.
NOTE
►
►
Place the lid (6) onto the egg holder insert (9).
Turn the selector switch (22) to the
lamp (21) lights up.
Reheating is finished when the water has completely
evaporated. An acoustic signal is emitted.
Turn the selector switch to the "Off" (middle) position. The
indicator lamp (21) goes out.
risk of burns from hot steam!
Hot steam can escape when the lid is removed.
►
NOTE
►
BEEM - Elements of Lifestyle
Pricking the eggs prevents the eggshell from cracking
during boiling.
Be careful when using the egg pricker. Risk of injury.
WArning
Carefully remove the lid to prevent burning by hot
steam.
Rinse the eggs in cold water after boiling to enable easier
removal of the eggshell.
operation
position. The indicator
en
57