Installing Canopy Catch; Attaching Icsa To Stroller; Preparing Stroller For Icsa - Britax BOB Gear Duallie CS1011 Instructions Manual

Confirm each Captured Screw is
threaded fully into, and tightened
firmly against, each Anchor Nut.
Failure to properly secure Restraint
Belt may result in accident, injury,
or death.

INSTALLING CANOPY CATCH

1. Rotate Canopies
Rotate both canopies forward to
expose Cross Strap Webbing.
Right
Canopy Stay
2. Locate Canopy Catch
Slide Canopy Catch over cross
strap webbing - making sure Clamp
portion is centered between the left
and right canopies.
Cross Strap
Webbing
Right
Canopy
3. Secure Canopy Catch
Hold Canopy Catch in place and
tighten screw with screwdriver.
Left
Canopy Stay
Canopy
Catch
Left
Canopy
4. Secure Right Canopy
Rotate right canopy back (toward
handlebar). Slide right canopy stay
under Canopy Catch. Pull on canopy
to verify that Canopy Catch securely
holds canopy in place.

ATTACHING ICSA TO STROLLER

PREPARING STROLLER FOR ICSA

1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar (see stroller
owner's manual if necessary).
2. Unfasten Restraint Belt Buckle
Unfasten buckle of Restraint Belt and
place buckle ends to the
sides of stroller seat.
Canopy Catch
Cross Strap
Webbing
Canopy Catch
Right Canopy
Stay
11
OMB11