BRITAX Child Safety, Inc.
Installing the Child Seat
General Information
Harness Mode
Install forward-facing only�
DO NOT use anything to raise the child seat off of the
vehicle seat�
Do not install with LUAS for a child weighing more than
18 kg (40 lbs) in harness mode�
The top tether must be used at all times when installing
the child seat in harness mode� Using the top tether will
improve the stability of your child seat and reduce the
risk of injury�
•
•
8
12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 8
12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 8
Use this child seat in harness mode with children at
least 2 years of age and who weigh between 11�3 and
30 kg (25 and 65 lbs) and who stand between 85 and
125 cm (34 and 49 in�) in height� Britax recommends
using harness mode until your child outgrows its fit
requirements� See the Child Fit Information section on
page 7 for more information�
This seat may be used in
either the upright or recline
position in harness mode
(see figures at right)�
WARNING!
Upright Position
Recline Position
1/29/2020 9:17:26 AM
1/29/2020 9:17:26 AM