Making A Program List - Pioneer XV-HTD510 Operating Instructions Manual

Making a program list
Making a progrmn list memostelling the playerwhich
tracks, and in what oNel; you wm_tplayed.Youca1
progran a sequence of up tu 24 tracks/chapters to play
from any of the discs loaded in the disc chalget: The
discsca1 be any combination ofDVD, V ideoCDaid
audio CD.Chapters/trackscan appear morn than once
in the playlist, or cm_be left out entirel>
1 Press PROGRAM (SHIFT & 7).
2
The pmgrmn screen @pears showing the first six steps
in the pl@ist. Navigatearound this screen using the
cursor buttons.Jump to the next six stepsusing the
1_,,4 button; tu the previoussix steps using the I',_-ql
button.
Enter a disc number (1 to 5).
Youcan use either the DISC1
-S
buttons, or the
number buttons.
• If this is the first stepyou're pmgramming, the
number of the disc that is currently in the playposition
will appear automaticall?c
• If the unit has already read the contents of the disc
you want to pmgram, the discdetails appear in the box
on the right ofthe screen (typeof disc, number of titles/
chapters/tracks,etc.). If the unit hasn't yet read the disc
then '? ? ?' appearsin the box for disc type.
• If you Walltto put the whole discinto the pmgrmn
list, jump to step 5 bdow.
3
4
S
6
7
Move the cursor to the TITLE/TRACK
field and enter a title or track number.
[][]Page
lid UMov_ _mPlay I_q_Exl
For DVDs, this number will be a disc title;for VideoCDs
and audio CDs,a track numbel:
For example, to enter title/track 6, press6. % enter
title/track 14,press 1,4.
• 'lb clear m_entry,pressCLEAR.
• D\q) only:If youWalltto put the whole title into the
progrmn list,jump to step 5 below:
If the current disc is a DVD, move the
cursor to the CHAPTER field and enter a
chapter number.
Press ENTER.
The cursor movesdown to the disc number field in the
next step.
Repeat steps 2-S to add more items to
the program list.
Press I_/11 to start the program list
playing.
Tip
• '1_) e dit any item in the progrmn list, position the
cursor on the item you wmlt to chm_ge,then enter a
new value using the number buttons.
• 'lb deletea whole step, position the cursor ml}_vhere
on the stepyou waut tu delete aud pressCLEAR,