Listening To Other Sources With Room Effects; Adjusting The Effect Level - Pioneer XV-HTD510 Operating Instructions Manual

• Surround Off (SUR.OFF)-Alls0urcesare
played through only the front lef_aid right speakers,
and the subwoofe_: N o effectsare added.
Note
• Tim surround nlodescmmot be used in combination
with DSPeffectsor with %kllz digital sources.
• You cmmot change the surround mode when Record
mode is active (seeDirect recordiHg on the fbllowing
page).
Press SURROUND MODE.
Each presschauges the sm'round mode as follows:
• AUTO
• STANDARD (surroundon,with no Advauced
Theater efYbct)
• MUSICAL
• DRAMA
• ACTION
• VIR.SURR.I
• VIR.SURR.2
• REAR WIDE
• SUN.OFF (surromldoft)
Listening to other sources with room
effects
Youcan add room effects1oaudio CDsaud other slereo
sources using lhe DSPmodes. Differenteffectswork
betlerwith different kinds ofmusic, so don't be afraid to
experinmnt a little.
There are seven DSPeffectsto choosefrom:
• Hall 1 - Large,wood-paueled concert hall sound.
• Hall 2-Large, stone-walledconcerthallsomld.
• Jazz - Livejazz club souud.
• Dance - Nightclubsound.
• Theater 1 - Classic,mid-size movie thealer
souud.
• Theater 2 - Large,modem nmvie theater sound.
• Simulated Stereo-Virtualslere0f0rm0n0
souro2s,
Note
•
The DSPeffectscannot be used in combination with
the sm'round modes or with 96MIzdigital sources.
• When playing slereosources with DSPeffects
switchedoff',them is no sound fl'omthe surround and
center speakers.
•
You cammt chm_gethe DSPmode when Record
mode is active (seeDirect recordiHg on the fbllowing
page).
Press DSP to select a sound mode.
Each presschauges the mode as follows:
• HALL 1
• HALL 2
• JAZZ
• DANCE
• THEATER I
• THEATER 2
• SIMULATED STEREO
• DSP OFF (no effectsadded)
1
2
3
Adjusting the effect level
YOU CaUadjust the effectlevelwhen using one of'the
DSPeffectsor AdvancedTheater effects.It is not possible
to chauge the effectlevelof lhe AUTO or STANDARD
surround mode (or when DSPor Sm'round nmdes are
off).
r_ Note
• You cmmot change the effectlevelwhen Record
mode is active (seeDirect recordizzg on the fbllowing
page),
Press SOUND.
Use the 41 or I_ buttons to select EFFECT.
Use the • and • buttons to adjust the
effect level.
Youcan adjust the effect levelin lhe ralge of I0 to 90.
4 Press ENTER.