Using 3Gpp-Compatible Mobile Devices - Vivotek Bullet Network Camera IP7330 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Using 3GPP-compatible mobile devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed from the Internet� For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 7�
To utilize this feature, please check the following settings on your Network Camera:
1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable�
For more information, please refer to RTSP Streaming on page 38�
2. As the 3G network bandwidth is limited, you can't use large video size. Please set the video
and audio streaming parameters as listed below�
For more information, please refer to Video on page 45�
Video Mode
Frame size
Maximum frame rate
Intra frame period
Video quality (Constant bit rate)
Audio type (GSM-AMR)
3� As most ISP and players only support port number 554 to allow RTSP streaming to go
through, please set the RTSP port to 554� For more information, please refer to RTSP
Streaming on page 38�
4. Launch the players on 3GPP-compatible mobile devices (ex. Real Player).
5� Type the URL commands in the player�
The format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming access
name for stream1 or stream2>�
For example:
14 - User's Manual
MPEG-4
176 x 144
5 fps
1S
40kbps
12.2kbps
rtsp://192.168.5.151:554/live.sdp