Log Placement - Napoleon Oakville Series Installation Manual

3.3

log placement

WARNING
!
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect that is
different in every installation. Take the time to carefully position the glowng embers for a maximum glowing effect.
"PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colour pig-
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
ments burn in during the heat-activated curing process.
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
more uniform as colour pigments burn in during the heat-activated curing process."
Insert only if
applicable ---->
Burner Ports
Stud
(Log #1)
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
(Log #3)
1
A1
If applicable, insert the following statement:
note:
Log numbers are located on the bottom or back of the logs.
Pilot Shield
A1
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
B1
C1 C2
Studs
Burner Overview
A2
Stud
(Log #1)
D1
D2
Studs
(Log #4)
1
finishing
Upper Burner
Support
Stud
A2
(Log #5)
B2
E1
Burner Ports
Pilot Shield
Notch
W415-1799 / B / 06.11.19
2
B1 B2
EN
15