Burner Removal - Napoleon Oakville Series Installation Manual

6.6

burner removal

note:
Some parts have been hidden for clarity.
1. Remove the safety barrier and glass door (see
"safety barrier and door removal/installation" section).
3. Remove the 5 screws securing the cover plate
in place. Slide the cover plate back and out.
5. Remove the 7 screws securing the lower
burner support in place. Remove the 4 screws
securing the deflectors in place, and then
remove the deflectors. Lift the lower burner
support up and out.
2. Remove the 8 screws securing the upper
burner support in place. Lift the upper burner
support up and out.
4. Remove the 2 screws securing the rear burner
in place. Slide the rear burner to the left and out.
6. Remove the 2 screws securing the front burner
in place. Slide the front burner to the left and
out.
maintenance
25
W415-1799 / B / 06.11.19
EN