Adjusting Enhanced Treble Settings (Enhanced Treble); Adjusting Middle Settings (Middle) - Blaupunkt Seattle MP57 Operating And Installation Instructions

Sound
The "Audio" menu is displayed.
u Press the softkey "Enhanced" 9.
The "Enhanced Audio" menu is displayed.
u
Press the softkey "Enhanced Bass"
6.
The current settings for bass frequency and
quality factor are displayed.
u
Press the or
between the setting options "Freq" (bass
frequency) and "Q" (quality factor).
u
Set the bass frequency and quality fac-
tor each with the
When you have fi nished making your
changes,
u press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Adjusting enhanced treble
settings (Enhanced Treble)
You can select 1 of 4 treble frequencies
(10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz).
Note:
For further information on setting the
treble level, read the section entitled
"Adjusting Treble" in this chapter.
Adjusting the treble frequency
u Press the MENU button A.
The menu is displayed.
u Press the softkey "Audio Settings" 6.
The "Audio" menu is displayed.
u Press the softkey "Enhanced" 9.
The "Enhanced Audio" menu is displayed.
34
button > to change
button @.
or
u
Press the softkey "Enhanced Treble"
7.
The current setting for treble frequency is
displayed.
u
Press the or
button > to adjust the treble
or
frequency.
When you have fi nished making your
changes,
press the OK button B repeatedly un-
u
til you reach the desired menu level for
additional settings or completely exit
the menu.
Adjusting middle settings
(Middle)
You can select one of 4 middle frequencies
(500 Hz, 1,000 Hz, 1,500 Hz, 2,500 Hz)
and set the level for the selected frequency
between -7 and +7. You can also select one
of 4 quality factors (0.5, 0.75, 1.0, 1.25).
Adjusting middle frequency, level and
quality factor
u Press the MENU button A.
The menu is displayed.
Press the softkey "Audio Settings" 6.
u
The "Audio" menu is displayed.
u Press the softkey "Enhanced" 9.
The "Enhanced Audio" menu is displayed.
u Press the softkey "Middle" ;.
The current settings for middle frequency,
level and quality factor are displayed.
button @ or the