Balance Adjustment - Zhiyun CRANE 2S User Manual

Installation and Balance Adjustment
① The CRANE 2S has three lock switches corresponding to each of the
three motor shafts. You can lock the CRANE 2S in the mounting or storage
position for your convenience. Make sure that the three lock switches are
unlocked when powering on to increase stability. Before balance adjustment,
you can lock the CRANE 2S in the mounting position and release the locks of
each axis in stages to facilitate balance adjustment.
② Place the camera handle close to the tilt axis motor for optimal stability. Loosen
the quick release base locking latch and push the entire quick release base so
that the camera handle is close to the tilt axis motor before locking the latch.

Balance adjustment

Locked stage for
安装锁定姿态
mounting
①
Locked stage for
收纳锁定姿态
storage
②
9