Installation And Balance Adjustment; Installing The Battery; Installing The Tripod; Installing The Quick Release Base Plate - Zhiyun CRANE 2S User Manual

Installation and Balance Adjustment

Installing the battery

Unscrew the rear cover of the handle and install three original 18650 Li-ion batteries
(note the direction of the positive and negative poles of the batteries). Then, tighten
the rear cover of the handle.
②
①

Installing the tripod

Screw the tripod to the base of the CRANE 2S handle, then unfold the tripod and
place the CRANE 2S on a flat surface.
③
②
①

Installing the quick release base plate

Take out the quick release base and push the quick release base into the CRANE
2S tilt arm. The detachable design means that you can quickly dismount the camera
from the CRANE 2S. The rear of the quick release base contains three 1/4 screw
holes making it easy for you to mount the entire quick release base to other devices.
②
①
6