Zhiyun CRANE 2S User Manual page 26

Using the CRANE 2S
Go mode (GO): Press the M button thrice
The roll axis motor is locked, and the tilt axis and pan axis motors quickly follow the
rotation of the handle.
Following mode (F): Press or press and hold the trigger button
The roll axis motor is locked, and the tilt axis and pan axis motors follow the rotation
of the handle. Push the joystick up/down to change the roll angle.
Roll axis
横滚轴
Roll axis
横滚轴
tilt axis 俯仰轴
Pan axis
航向轴
tilt axis 俯仰轴
Pan axis
航向轴
22