Smartphoneinstallation; Balance Adjustment - Zhiyun SMOOTH-Q User Manual

Smartphone Installation
Smartphone Installation
Push and hold open the camera clamp, slide the smartphone in as close as possible against
the tilt axis motor , and clamp on.
Do not power on the stabilizer before the smartphone is properly mounted.
2
11 zhiyun-tech.com
1
Gravity Center Adjustment
Proper adjustment of gravity center ensures better power saving during operation. The
stabilizer may still function well when the gravity center is not properly configured, however,
it may lead to more power consumption on the motors, and can greatly affect the torque
output.
Switching Mobile Mounting Direction

Balance Adjustment

If the smartphone fails to stay in level
and keeps tilting when mounted,
loosen the Roll (Y) Axis Thumb Screw
to adjust the gravity center by sliding
the horizontal arm (as marked red in
the Figure) until the smartphone stays
still and vertical on the tilt axis.
Tighten the Thumb Screw after the
smartphone is well balanced in level
to ensure normal operations.
Loosen the Mobile Clamp Thumb
Screw on the back and rotate the
mobile clamp to the desired direction
(either in horizontal or
vertical).Tighten the Thumb Screw to
ensure normal operations.
NOTICE: Make sure the stabilizer is
powered off before changing the
mobile mounting direction.
zhiyun-tech.com 12