Gimbal Stabilizer Compartment relating to Crane Plus, and the right to make changes at any time without notice. Please visit www.zhiyun-tech.com for the latest product information. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by the terms and conditions herein.
Page 5
50° C can lead to a fire or explosion. Use of battery below -10° C can 2. Make sure the rotation of the gimbal axes is not blocked by external force when Crane Plus is lead to serious battery damage.
Page 6
Dispose of the battery in specific recycling boxes only after a complete discharge. Do not put Battery Charging 1. Do not attach the batteries to a wall outlet or car charger socket directly. Always use a ZHIYUN away the battery in regular trash containers. Strictly follow your local regulations regarding the approved adapter for charging.
Quick Start Guide Preparing and Charging the Batteries Before using Crane Plus for the first time, please fully charge the batteries to activate and ensure Get to Know Crane Plus normal operation by using the charger that comes in the package.
Tilt Motor, and tighten the Camera Mounting Screw to fix the camera ❹ positionTilt Motor, and tighten the Camera Mounting Screw to fix the camera position. Do not power on the stabilizer before the camera is properly mounted. zhiyun-tech.com zhiyun-tech.com...
Once the camera can stay still and Horizontal Arm level. Complete this step by almost level with its lens facing front, complete ❶ this step by tightening up the Camera Mounting tightening up Thumb Screw Screw. zhiyun-tech.com zhiyun-tech.com...
Quick flash 3 times for battery level of 50%-75%. Joystick Operation Quick flash 2 times for battery level of 25%-50%. Joystick controls the camera movement by Quick flash 1 time for battery level of 0%-25%. turning the 3 axes up/down or left/right. zhiyun-tech.com zhiyun-tech.com...
F o l l o w i n g M o d e : The camera pans left/ T h e c a m e r a p a n s Please use batteries provided or approved by ZHIYUN only, otherwise it may cause accidents. mode locks movement allows the camera to...
Make sure batteries are installed during upgrade. 1. Install the batteries properly. 1. Visit ZHIYUN's official website: www.zhiyun-tech.com. 2. Hold the camera mounting plate and long press the Power Button to turn on the stabilizer. 2. Click to open the "Downloads" page, and find the Firmware Upgrade Tutorial package.
2. Video recording: Double press the Power Button to start video recording, and double press again to stop recording. 3. Zooming: Push the Shifter Lever on the stabilizer handle in T direction to zoom out or W direction to zoom in. zhiyun-tech.com zhiyun-tech.com...
Page 15
Toggle: To zoom in/out. Proper camera cable connection is required to control the camera. Some remote control features The remote controller turns off automatically when left idle for 2 minutes. may not be supported for some camera models. zhiyun-tech.com zhiyun-tech.com...
Page 16
3. Unscrew the fixing clamp in the middle of the handles, take out the protection ring and insert it into the stabilizer. 4. Clip the fixing clamp onto the stabilizer with the protection ring, and then tighten the screws of the fixing clamp. Clip onto the area as marked RED above. zhiyun-tech.com zhiyun-tech.com...
Product Specifications Operation guide on motor torque adjustment Crane Plus Firmware V1.52 and above supports parameter setting for motor force. Users can set the Standard Remarks motor force to adapt to cameras with different weights via the calibration upgrade tool or the app.
15 days upon receipt of the product. 2. Customers are entitled to free repair service from ZHIYUN for any product proven defective in material or workmanship that results in product failure during normal consumer usage and...
Need help?
Do you have a question about the Crane Plus and is the answer not in the manual?
Questions and answers