CODELOCKS Kit-Lock KL1100 Getting Started Manual page 7

Disable Maximum Locked Period
1. Plug the Programmer into the lock.
2. Present the Master Card to the lock.
3. Press: # ••
4. To exit programming mode, unplug the Programmer. The Red LED will flash once
within 5 seconds to confirm.
Auto-Unlock at a Set Time
Note: The time and date must be set first to use this function. See page 8 for instructions.
1. Plug the Programmer into the lock.
2. Present the Master Card to the lock.
3. Press: # ••
•• 11
Example: #
Result: The lock will unlock at 02:30.
4. To exit programming mode, unplug the Programmer. The Red LED will flash once
within 5 seconds to confirm.
Disable Auto-Unlock
1. Plug the Programmer into the lock.
2. Present the Master Card to the lock.
3. Press: # ••
4. To exit programming mode, unplug the Programmer. The Red LED will flash once
within 5 seconds to confirm.
USING THE LOCK - PRIVATE FUNCTION
Open the lock by presenting the Master Card or a User Card to the front of the lock. The
lock will remain open for 4 seconds by default before re-locking.
Adding / Removing User Cards
1. Present the Master Card to the lock.
2. Present a new User Card immediately. The Blue LED will start to flash for 5
seconds indicating it is waiting for more cards:
a) If the card is not already registered it will be added and the Blue LED will
flash. This is now a User Card.
b) If the card is already registered, it will be removed and the Red LED will flash.
10 •• 00 ••
11 •• Unlock Time
•• 0230 ••
11 •• 2400 ••
••
6