Standalone Mode - CODELOCKS Kit-Lock KL1100 Getting Started Manual

Card Clients
Master Card
• Opens the lock (deletes current User Card in Public Function)
• All programming including Technician and User Card registration
Technician Card
• Opens the lock (retains current User Card in Public Function)
User Card
• Opens the lock
• Locks the lock (in Public Function)
IMPORTANT
Once a Master Card is registered, it should be kept in a safe location. The Master
Card is required for all programming operations and setting the lock Override Code.

STANDALONE MODE

Functions
Before programming, select the most appropriate function for the application: Private
Function or Public Function.
Private Function
This function is used where the same pre-registered User Cards are repeatedly
used, auto-locking after each opening. Up to 50 individual User Cards, 10
individual Technician Cards and 1 Master Card can be registered per lock.
This function supports Dual Card Authorisation, where 2 Card Clients (either User
or Technician) must be presented within 5 seconds of each other to unlock.
Public Function
The user presents a compatible card to an available open lock, this locks the lock
and only that User Card, or a registered Technician/Master Card can be used to
unlock the lock. The lock remains open ready for the next user. This function is
used for short-term, multi-occupancy applications.
This function supports Auto-Unlock, where the lock can be set to unlock at a
specific time or after a defined time period.
A maximum of 10 individual Technician Cards and 1 Master Card can be
registered per lock.
2