CODELOCKS Kit-Lock KL1100 Getting Started Manual page 4

FIRST USE (INITIALISATION)
Upon powering up the lock, it will be in an unlocked state and the LED will flash Purple.
For Private Use:
1. Present a card to the lock. This is now the Master Card. Keep this safe.
2. The Blue LED will flash twice to confirm acceptance.
3. Wait 5 seconds for the Blue LEDs to stop flashing and for the latch to engage,
the lock will now be in Private Function.
For Public Use:
1. Present a card to the lock. This is now the Master Card. Keep this safe.
2. The Blue LED will flash twice to confirm acceptance.
3. Present a second card within 5 seconds while the Blue LED is flashing. This is
now a Technician Card.
4. Repeat step 3 to add additional Technician Card. Up to 10 can be active on the
lock at any given time.
5. Wait 5 seconds for the Blue LEDs to stop flashing and for the latch to retract. The
lock will now be in Public Function.
PROGRAMMING
Change the Master Card
1. Plug the Programmer into the lock.
2. Present the Master Card to the lock.
3. Press: # •• 01
4. Present the new Master Card to the lock within 5 seconds while the Blue LED is
flashing.
5. To exit programming mode, unplug the Programmer. The Red LED will flash once
within 5 seconds to confirm.
Change the Function
To change between Public and Private Functions:
1. Plug the Programmer into the lock.
•• 01 ••
3