Removing The Power Supply - Dell Dimension XPS Manual

Documentation

Removing the Power Supply

NOTICE: Before disconnecting a device from the computer, wait 10 to 20 seconds after disconnecting the computer
from its electrical outlet. Before removing a component from the system board, verify that the standby power light on
the system board has turned off. To locate this light, see
1. Follow the instructions in
2.
Open the computer cover.
3. and the card fan.
Remove the card
4. Disconnect the power supply cables and the card fan cable.
http://support.dell.com/support/edocs/systems/dimxpsg2/en/SM/parts.htm (28 of 37) [3/26/2008 3:57:09 PM]
"System Board
"Before You
Begin."
Components."