Product Contents; Specifications - KALEAS LDM 500-80+ Operating Instruction

LDM 500-80 +
Avoid contact with leaked fluid. In case of accidental contact, rinse
with water and seek medical assistance.
! Improper handling poses the risk of short-circuit or even explo-
sion. Harmful vapors can escape and irritate the airways. Seek
fresh air, and get medical attention if complaints persist.
Dispose of depleted batteries and defective equipment
!
according to statutory regulations.

Product contents

1x Laser Distance Meter LDM 500-80
1x operating instructions
1x Belt bag

Specifications

Measuring range ........................... 0,10 ... 80m / 0,33 ... 262 ft
Typical measuring accuracy............ ±1,5 mm *
Smallest displayed unit ................. 1 mm
Laser Wavelength.......................... 630 ... 660 nm
Output ................................... < 1 mW
Class ...................................... 2
Maximum output .......................... < 30 mW
Inclination sensor
Measurement range ................ 360°
Typical measuring accuracy ..... ± 0.3º **
Auto-Off ....................................... 180 s
Number of memory spaces ............ 99
Battery
Operating temperature.................. -10 ... +50 °C
Operating humidity ....................... 0...75 % not condensing
Storage temperature without battery
Dimension .................................... 122 x 45 x 26 mm
Weight without battery ................. 105 g
* The typical deviation may be greater under unfavorable conditions, such as
bright sunshine or with poorly reflecting or very rough surfaces. For distances
over 50 m, it may increase to a maximum of ± 10 mm if no target board is
used.
** The typical deviation may increase under unfavorable general conditions
(e.g., at temperature limit).
© KALEAS GmbH & Co. KG
ENGLISH
+
2x batteries type AAA
1x Hand strap
2x 1,5V Type AAA
up to 5000 measurements
+10...+70 °C
43